El Paso, TX Mobile Crane Certification – 29 CFR 1926.1400
In accordance with OSHA 29 CFR 1926.1400, Total Equipment Training offers crane certification through the National Commission for the Certification of Crane Operators (NCCCO).
The NCCCO certification program is recognized by the Federal Occupational Safety & Health Administration as meeting OSHA’s requirements for crane operator competency. Crane operator certification is required for operators who work in the construction industry and has also been adopted by many states for all crane operators.
Total Equipment Training’s trainers are all certified operators and examiners for the NCCCO. Their experience and knowledge are evident by our high success rate of licensed operators. Our comprehensive program will provide candidates with all the information they need to successfully pass the written exam and will provide the time and training they need to confidently complete the rigorous timed practical exam.
Give our office a call today at (610) 321-2679 to discuss your corporate event.
El Paso, TX Program Outline
Classroom Training − Core exam, specialty and load charts.
Site (Domain 1 of the exam)
- Know the ability of supporting surfaces to handle the load.
- Know the proper use of mats, blocking or cribbing and outriggers or crawlers and how they affect handling the load.
- Know electric power line hazards, regulations and safety practices.
- Know how to identify and evaluate hazards.
- Know how to review lift requirements with site supervision.
Operations (Domain 2 of the Exam)
- Know federal regulations and industry standards for the safe operation of cranes
- Know how to conduct shift crane inspections
- Know how to pick, carry, swing and place a load safely
- Understand methods of reeving wire ropes and selecting the proper load block and/or ball
- Shutting down and securing the crane
- Know the standard hand and voice signals
- Know manufacturer’s recommendations for operating crane
- Know how to verify the weight of the load and rigging
- Know how to determine where the load is to be picked up, placed and to verify the radii
- Basic load rigging procedures
- Perform shift and monthly maintenance and inspection
- Use and requirements of operational aids and safety devices – what to do if they malfunction
- Operations that reduce crane capacity
- Procedures for operating safely under different conditions
- Procedures for load control and use of handheld tag lines
- Proper use of outriggers
- Effects of dynamic loading under different conditions
- Effects of side loading
- Operators ability to stop operations
Technical Knowledge (Domain 3 of the Exam)
- Basic crane terminology and definitions
- Function and limitations of the crane and attachments
- Wire rope
- Rigging Devices and their uses
- Limitations of protective measures against electrical hazards
- Effects of load share and load transfer in multi-crane lifts
- Significance of instruments, gauge reading and machine power systems
- Shift inspections and maintenance
- Calculate net capacity for the crane configuration using load charts
- Know how to use attachments
- Principles of backward stability
- Fall protection requirements
- Requirements for access and egress
- Assembly/disassembly operations
Load Charts (Domain 4 of the Exam)
- Terminology necessary to use load charts
- Understand how to read and use load charts for the specific specialty being tested on
Following are the tasks that make up the practical exam. Portions of the exam are timed so adequate practice time is needed to be successful in passing the exam.
- Pre-operational inspection
- Task 1: Place overhaul ball in stop circle
- Task 2: Follow hand signals
- Task 3: Place overhaul ball in barrels
- Task 4: Negotiate zigzag course with test weight
- Task 5: Safe shutdown and securing procedures