Committed to superior quality and results
Pay My Invoice
Cart
Total Equipment Training Logo
Buy Training Manuals & Practice Tests For CCO Certification

CCO Mobile Crane Practice Test For Certification

Heavy Equipment Operator Training- NCCCO Rigger Training- Total Equipment Training

RIGGER SIGNAL PERSON TRAINING

OSHA requires a signal person be present …

Forklift Machine

FORKLIFT TRAINING

Refresher forklift operator training is required once every three years!

lift

AERIAL WORK PLATFORM (NOW MEWP)

“Only trained persons shall operate aerial lifts” – OSHA 1910.67(c)

START YOUR CREW’S ON-SITE TRAINING!

Total Equipment Training offers CCO Mobile Crane Certification training materials and mobile crane test prep resources for both the written and practical exams. We also provide training on-site using your equipment, which your operators are familiar with. On-site mobile crane training saves time and money.

As of January 2025 these practice tests have been recently updated. Check back every 6 months, as Total Equipment Training makes every effort to refresh these CCO crane operator practice test questions for you and your staff.

Additional heavy equipment study materials are available.

CCO MOBILE CRANE PRACTICE TEST

Welcome to your CCO MOBILE CRANE PRACTICE TEST

1. 

What type of lay rope is most commonly used by mobile cranes?

2. 

Who is responsible for doing frequent inspections on a mobile crane?

3. 

What is the maximum speed that crane operations can be performed?

4. 

At what wind speed must the operator stop and discuss whether or not to continue operations?

5. 

What is the primary identification for cranes?

6. 

Where should the load charts for cranes be stored?

7. 

Load chart capacities on mobile cranes are based on the crane being set up within what percentage level?

8. 

Capacities are often reduced while performing duty cycle operations, such as: concrete placement, clamshell operations, and magnet work. Where would you find this information?

9. 

How much twist is acceptable on a hook, when it is noted on the inspection report?

10. 

10.If a boom length is not listed on the load chart, then:

11. 

What type of mobile cranes pick up and carry loads?

12. 

When a load radius is not listed or is between values:

13. 

13.When making a lift with the crane, how is the weight of the headache ball found?

14. 

How is boom length measured?

15. 

When a truck crane is set up on fully extended outriggers, the stability is based on what percentage?

Please fill out your contact information so you can get your results sent to your email!

Ready For the Real CCO Test?

Total Equipment Training specializes in providing candidates and employers with comprehensive preparation for the CCO certification exam for heavy equipment operation. Our services include study materials, classroom training, mock practice tests, and hands-on experience with the actual crane and course used in the exam.

Our trainers, certified in their respective classes, are available sometimes to administer CCO exams. If you’re looking to enhance your comfort and proficiency with the equipment you use daily, Total Equipment Training offers a comprehensive solution to help you succeed in your CCO certification journey.

Schedule your onsite group training today and take the first step towards success.